![]() ![]() There are flush kits available in the market that can help you do the job yourself. Flushing is done by pushing water through the outlet hose of the heater core and draining the gunk from the inlet hose. Recommended videoīefore you consider replacing the heater core in your Atlas Cross Sport, it is recommended to flush the existing heater core. If the coolant level is low, open the cap and pour some coolant into the tank until it is between minimum and maximum mark. You just have to locate the coolant overflow reservoir and inspect the level of coolant in it. Check coolant levelĬhecking coolant level in Atlas Cross Sport is a fairly some job. The sound is most prominent right after you start the vehicle. Low coolant level or air in the heater core can sometimes cause sloshing sound from behind the dashboard when the engine is running. By filling and properly bleeding the system the heat should come back. Since the heater core is usually slightly higher, the air will accumulate in there first. If there is air trapped inside the heater core, the coolant will not be able to flow through it properly. When you turn on the heating, air gets blown through the heater core, warming the air in the cabin. The hot coolant is pumped through the heater core located behind the dashboard. The heating system in Atlas Cross Sport uses hot coolant or antifreeze from the engine block to heat the interior of the vehicle. ![]() If the cooling system is not full and bled properly, the water pump will not be able to push the coolant around the system efficiently. Low coolant level or air in the cooling system can cause the heater to stop working properly in Atlas Cross Sport. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |